Our comprehensive portfolio comprises everything you need for safe, reliable and efficient medical gas distribution and control.
Pipes & Fittings
Degreased copper tube is manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. All tube is manufactured under strict quality control procedures to ISO 9001:2008. Our copper tube is CE marked as a class IIa Medical Device 93/42/EEC .
It is designed for use in Medical gas pipeline system installations and incorporates the specialist requirement of the MGPS industry to include cleanliness, packaging and usability required to attain the levels of quality as stated particularly in EN 7396-1 & HTM 02-01.
Copper fittings are manufactured in UK under BS EN 13485 Medical Devices: Quality Management Systems. All fittings are degreased for medical gas use, engraved with EN 1254, size and manufacturer details and individually packed.
Cleanliness is guaranteed below 0.01 mg/cm2 of hydrocarbons on the degreased surface of the fitting.
Lockable line valves are manufactured under BS EN 13485 Medical Devices: Quality Management Systems and CE marked with notified body British Standards Institute under the Medical Device Directive 93/42/EEC.
They comprise of a 2-piece full bore male threaded nickel plated brass ball valve c/w chrome plated brass ball, blow- out proof stem, stem O-ring, Teflon ball seals and flat face copper stub pipe assemblies. The copper stub pipe assemblies are manufactured from medical gas copper tube compliant to BS EN 13348 and are factory soldered to brass flat face seal housings chemically cleaned and degreased.
The copper pipe stubs enable easy fluxless brazing to the medical gas pipeline system.
The handle is lockable in open or closed position to prevent unauthorised operation of the valve.
All line valves are factory tested for tightness and leakage, batch numbered and individually end capped and bagged in clear polythene bag to maintain cleanliness.
Medical gas outlet
Tektraco can supply a range of medical gas outlets in accordance to BS 5682, DIN 13260-2, AFNOR NFS90-116, AA875 24 30, and UNI 9507 standards.
Medical gas outlets can be supplied suitable for wall mounting, flush wall mounting and bedhead mounting. The second fix of the outlets can be supplied in plastic, all metal construction and also metal ring.
DIN socket outlets
Designed to meet
DIN 13 260-2
UNI socket outlets
Designed to meet
Afnor Socket outlets
Designed to meet
Compact Area Shut Off Valve Unit:
Multi valve compact area control boxes are installed at the entrance of wards to control the supply and also monitor medical gases to the wards. Designed to comply with EN ISO 7396-1 including pressure monitoring, Low and high pressure alarm, and emergency supply inlet.
Apart from analogue displays we can also offer optional digital displays, consumption measurement, temperature measurement, door tamper alarm and History Observation.
HTM 02 Area Valve Service Unit (AVSU) Module
The HTM 02 AVSU module can accommodate up to six gases together with an area alarm and is usually installed at the entrance to a ward to provide zoning to the said ward.
• Modules can be supplied as flush or surface mounting.
Fully compliant to HTM 02-01, BS EN 18082 and C11
• Include Upstream and Downstream NIST connectors.
• Gas types available Oxygen, Nitrous Oxide, Entonox, Medical Air, Surgical Air, Vacuum, Carbon Dioxide, Nitrogen, Helium Mix, Lab Gas, other gas types available on request.
• Factory Tested and certified and Pre piped for easy installation.
• Front covers can be supplied as epoxy coated steel or Polymer laminated anti microbial cover.
• Analogue or Digital Area alarm can be factory fitted in the module.
• Option flow measurement for each individual gas type to provide flow data 24 hours each day.
Second Stage Reduction box
Tektraco can supply and install Line pressure reduction units for medical gases in line with ISO 10524-2 and CE marked to medical device directive 93/42/CEE. These can be supplied either as separate wall mounted, as simplex or duplex or else, multi regulators for different gases can be housed in a box.
The main features common to all the boxes are the following:
• Metallic boxes for wall embedding or external mounting to contain simplex or duplex regulators and vacuum in different configurations
• Available in powder coating or INOX
• Windows for checking of pressure status
• Provided with key lock door and emergency opening system